How to make a bootable pen drive on Windows?

Before learning how to make a bootable pen drive. Let us first know what a bootable pen drive is.

What is bootable pen to paper type drive?

A bootable pen drive is just a drive that supports booting the software and starting the computer.

Therefore, if a boot file is available in your pen drive, it will appear as soon as the system starts, mechanically capturing the important boot system and starting to boot itself. Later, you can continue to install Windows further.

Now, how do I create a bootable pen drive for Windows? Well, to make any pen drive a bootable drive on Windows, you need to make some changes in the BIOS settings. To do this, follow the steps below.

• Restart the system, press the f2/f8/f1 key to open the BIOS.
• Next, go to the " Boot " menu
• The CD/DVD Boots menu will be at the top
• Put the " Removable Disk Boot " option on top

Only. You are now ready to use the pen drive as a bootable pen drive.

However, before proceeding, make sure your pen drive has a capacity of more than 2GB. Also, if any important data is stored on the pen drive, it is fully backed up. Also, don't forget to format the pen drive before you start.

Don't worry if your pen drive is inaccessible, or if you forget to back it up and format it. Simply use Remo Recover  to recover data from the pen drive as it is a reliable and efficient way to recover lost or deleted data from a USB drive.

Yes, ok? If so, please follow the step-by-step instructions explained below to create a bootable USB drive on Windows.

In Windows production can start the process to write type drive:

• Connect the pen drive to a running computer
• Open a command prompt  (run as administrator)
• Next enter the following code and press Enter
• Type disk part  in the CMD window
• Next type list disk
• You will see all the disks
• Type select disk X ( X  is the letter of the pen drive)
• Type clean
• Type create partition primary
• Type select partition X
• Type active
• Type format fs = 32
• Type f:
• Type cd boot
• Type bootsect /nt60 X:
• Finally , type exit

Now copy the entire installation file that exists in the DVD installer to the pen drive. And, you are done.

You can also use your third-party tools available online to make your pen drive a bootable drive on a Windows computer.